Flash to talk manual programming

• If a telephone is used for programming, an M or M telephone must be used. Note: For more information, refer to the Flash Set Up and Operation Guide and Flash Installation Guide. Programming overview The following table provides an approach to Flash programming. To use this overview: • determine which options apply to your system. side defines the many aspects of programming. Open the DIGITAL CONTACT Talk Group tab on the left side and double click on the first line (Line No. 1). The Digital Contact List typically contains the DMR Talk Groups which the user may want to use. Since you should only flash PLCs over a direct connection, we will only be discussing a local subnet. Here’s how to configure your driver in RSLinx: Select “Communications” tab. Select “Configure Drivers” option. In the top selection bar, choose “EtherNet/IP Driver” from the drop-down menu. Press the “Add New” button.

Startalk Flash Greetings Company Greetings 1 – Feature 2 – Log: Dial (3-digit DNs) or (2-digit DNs) 3 – Press AA 4 – Press GRTG 5 – Press GRTG 6 – Greeting: Dial greeting number (). Greetings = Table 1, Greetings = Table 2 7 – REC: Record greeting after the tone Auto Attendant Menu Prompts. ID code Authentication code used in flash programming and in on-chip debugging. For details, refer to the user’s manual of the MCU. Lock bit One of the safety functions of the MCU. For details, refer to the user’s manual of the MCU. HEX file Program file without flash option data. l to replay the Star-Talk Flash Options, press W q l to back up the display to the previous display prompt from a single-line display, press q l to interrupt most voice prompts or enter an option, press q to speak to the Operator, press q StarTalk Flash features.

The probe can be used to program locks or to interrogate a lock when it is green light will flash once, then the yellow light will flash 12 times. Installation, Programming and Operations Manual. Document Rev: M4 from the DVC-KD and utilization of the phone's push-to-talk button). The. microcontrollers with 16 to 32 Kbytes of Flash memory. For information on the STM8 core, refer to STM8 CPU programming manual (PM).